Company News
In mold manufacturing, there is a step that is often overlooked by outsiders yet directly determines the success of many precision molds—copper electrode machining. The term "copper electrode" (tonggong in Chinese) is the colloquial name in coastal regions for the electrode used in electrical discharge machining (EDM), commonly called "electrode" in inland areas. Because the vast majority of electrodes are made of red copper (pure copper), the name arose. The fundamental reason molds require copper electrode machining is this: many areas of a mold cavity cannot be reached by traditional cutting tools—deep holes, narrow slots, sharp corners, and fine ribs—and must be produced by EDM. The copper electrode is the forming tool used in EDM to "burn" these shapes into the steel. Without it, these complex structures cannot be precisely formed in hardened mold steel.
1. Why Copper Is Used for Electrodes
Using copper rather than other materials for electrodes is based on several practical considerations. Pure copper has good electrical conductivity, so the electrode itself generates little heat and suffers low wear during discharge; it is relatively soft and easily machined by CNC milling into complex shapes; and it can discharge stably even under difficult machining conditions, making it less prone to arc burns. Graphite is also a common electrode material—it wears less and machines faster in roughing—but pure copper achieves better surface roughness (better than Ra1.25μm) and sharper edges in fine machining. That is why the final forming stage of precision molds still relies on copper electrodes.
2. The Core Problem Copper Electrode Machining Solves: Places Tools Cannot Reach
After mold steel is hardened, its hardness is extremely high. Although CNC milling cutters can handle most roughing and some finishing, the cutter itself has a diameter and inevitably leaves dead zones. For example, a right-angle root in a mold cavity, a narrow slot only a few tenths of a millimeter wide, or fine ribs on a phone housing mold—the milling cutter cannot enter or clean them out. At this point, the areas requiring EDM must be "separated out," and a corresponding copper electrode made for each. The electrode is then placed on the EDM machine, and pulsed discharge between the electrode and the workpiece gradually erodes the excess metal. The copper electrode here acts like a "forming tool"—whatever shape the electrode has, the cavity it machines is its mirror image.
3. The Coordination of Rough and Fine Electrodes
In actual machining, one set of copper electrodes is usually not enough. In the roughing stage, a "rough electrode" is used with a larger spark gap (0.2–0.5 mm per side) to quickly remove most of the allowance; in the finishing stage, a "fine electrode" is used with the spark gap reduced to 0.05–0.15 mm to achieve the final dimensional accuracy and surface quality. This division of labor makes EDM both efficient and precise, and the quality of the copper electrode directly determines the final result of the mold cavity.
Summary
Copper electrode machining is not an optional auxiliary step in mold manufacturing—it is a key process that solves "the places where cutting tools are powerless." From phone housings and TV front panels to various precision injection molds, the fine textures visible to the eye and the corners that milling cutters cannot reach are all gradually "eroded" by copper electrodes on EDM machines. For mold manufacturers, the design and fabrication level of copper electrodes is often a dividing line that marks their precision machining capability.





