Injection molding

⭐Material "PP"— The "King of Hinges": Lightweight, Durable, and Fatigue-Resistant

Physical Properties:

PP is the lightest of the five general-purpose plastics, with a density of only about 0.90 g/cm³ (lighter than water—it can float on the surface). Its physical characteristics are quite unique: translucent or milky white, tough in texture, and possessing excellent resistance to chemical corrosion. Most remarkable is its exceptional fatigue resistance—it can withstand hundreds of thousands or even millions of repeated folds and bends. However, PP has low surface energy, meaning its surface "polarity" is low, which makes it behave like a piece of wax that is hard to stick to—printing, painting, and bonding are all difficult.

Advantages:

·Extremely strong fatigue resistance: The ideal material for "living hinges"—formed in one piece without breaking.

·Heat-resistant and non-toxic: With a relatively high melting point, it can withstand microwave heating above 100°C, making it one of the very few plastics that can go directly into a microwave.

·Good chemical stability: Almost unaffected by water and most acids, bases, and salts, and it does not readily absorb water.

Extremely low cost and lightweight: Can significantly reduce product weight and material costs.

Disadvantages:

·Poor weather resistance: The tertiary carbon atoms on the molecular chain are easily attacked by ultraviolet light, so long-term outdoor use tends to cause aging and embrittlement (UV stabilizers are usually added).

·Difficult surface treatment: Due to low surface energy, conventional inks will not adhere and paint easily peels off; special pretreatment such as corona treatment or flame treatment is required.

·Insufficient rigidity and low-temperature resistance: At room temperature, its rigidity is lower than ABS, and at low temperatures (below 0°C) it tends to become brittle.

·High shrinkage rate: Large shrinkage during injection molding (typically 1.5%–2.5%), which easily leads to product deformation or sink marks.

Injection Molding Materials - hainamould Mould Company Limted

Suitable Products:

Because of its remarkable "fatigue-resistant bending" property, PP's most famous application is the manufacture of one-piece living hinges (such as hand sanitizer bottle caps and various folding storage boxes). In addition, it is heat-resistant and non-toxic, making it very suitable for microwave food containers, disposable takeout boxes, and food storage containers. In the automotive industry, PP is also commonly used to manufacture large components such as bumpers and dashboards.


Nov 18, 2026 at 10:22

Copyright 2026  Hainamould.com   All rights reserved.