Injection molding

⭐Material "PE" (Polyethylene) — The "National Plastic" That Handles Both Soft and Hard Applications

Physical Properties:

PE is currently the plastic with the largest production volume and the widest range of applications in the world. Its core physical characteristic is a "waxy feel"—smooth and greasy to the touch—combined with excellent flexibility and low-temperature resistance. PE is mainly divided into two types: high-density (HDPE) and low-density (LDPE). HDPE has tightly packed molecular chains and high crystallinity, making it hard and impermeable to water; LDPE has highly branched molecular chains and low crystallinity, making it very soft with good translucency. Both possess extremely high chemical stability and excellent electrical insulation.

Advantages:

·Excellent chemical stability: Highly resistant to acids, bases, and various salts, and insoluble in any organic solvent.

·Good low-temperature resistance: Remains flexible at -70°C or even lower, without easily cracking from freezing.

·Wide processing range: Can be injection molded into rigid parts, blow molded into bottles, or extruded into pipes and films.

·Extremely cheap and non-toxic: Raw material costs are extremely low, and it meets food-grade hygiene standards.

Disadvantages:

·Poor heat resistance: Low softening temperature—HDPE generally should not exceed 80°C, and LDPE is even lower—so it deforms easily under high heat.

·Relatively low strength and rigidity: Even HDPE's rigidity and tensile strength cannot compare with engineering plastics such as ABS and PC.

·Prone to stress cracking: Under stress or when in contact with certain surfactants, it is susceptible to environmental stress cracking (ESCR).

·Extremely difficult to adhere to surfaces: Like PP, it has very low surface energy and can hardly be printed or bonded directly.

Injection Molding Materials - hainamould Mould Company Limted

Suitable Products:

HDPE (High-Density): Mainly used for products requiring hardness, pressure resistance, and load-bearing capacity, such as shampoo bottles, laundry detergent jugs, gas pipes, agricultural irrigation pipes, and outdoor park benches (wood-plastic composites).

LDPE (Low-Density): Mostly used in scenarios requiring softness and toughness, such as supermarket plastic shopping bags, food cling wrap, agricultural greenhouse films, and various flexible tube packaging.


Nov 18, 2026 at 10:26

Copyright 2026  Hainamould.com   All rights reserved.