Injection molding

⭐Material "PC" (Polycarbonate) — The Indestructible "Transparent Bulletproof Glass"

Physical Properties:

PC is an amorphous thermoplastic engineering plastic. Its most striking physical property is its "extremely robust impact strength"—up to 250 times that of ordinary glass—while still maintaining high transparency (light transmittance of about 90%). PC also has excellent heat resistance, maintaining stable mechanical properties over a wide temperature range from -40°C to 120°C. However, its molecular structure makes it relatively sensitive to notches, and its surface hardness is relatively soft.

Advantages:

·The ceiling of impact resistance: It almost never shatters or breaks when dropped or struck, earning it the name "transparent metal."

·Excellent heat resistance: High heat deflection temperature; it can withstand high-temperature disinfection and prolonged outdoor sun exposure.

·Good dimensional stability: Low molding shrinkage, enabling the manufacture of high-precision engineering structural parts.

·High flame-retardant rating: It is inherently flame-retardant to a certain degree and does not produce large amounts of toxic gas when burning.

Disadvantages:

1.Poor scratch resistance: The surface easily develops scratches, usually requiring a hard coating.

2.Not resistant to organic solvents: It is highly prone to stress cracking when exposed to strong bases, certain adhesives, or organic solvents.

3.High processing requirements: High melt viscosity requires higher temperatures and pressures during injection molding, and it must be strictly dried before molding.

4.Relatively high cost: Among engineering plastics, it is a relatively expensive material.

Suitable Products:

PC is widely used in applications with extremely high requirements for safety and light transmission. Common examples include: safety face shields, riot shields, industrial transparent guards, automotive headlight lenses, phone/laptop housings (in combination with other materials), and power bank casings.


Nov 18, 2026 at 10:37

Copyright 2026  Hainamould.com   All rights reserved.